|
|
|
|
|
|
|
Features
PLEASE READ ALL INSTRUCTIONS BEFORE STARTING
TOOL REQUIRED:
1 Plastic Squeegee OR CREDIT CARD
PREPARATION:
The temperature of the room and the temperature of the intended surface should be between 45 and 90 degrees.
INSTALLATION
1. START BY CLEANING THE SURFACE
2. POSITION AND TEST THE GRAPHIC ON THE SURFACE. DO NOT SEPARATE LINER FROM PRE-MASK. This is to insure proper placement before the liner is removed.
3. SEPARATE LINER FROM PRE-MASK
4. CAREFULLY PLACE THE VINYL GRAPHIC (WITH PRE-MASK) ON THE SURFACE
5. USE SQUEEGEE TO APPLY VINYL GRAPHIC. WORK FROM THE CENTER OUT TO AVOID BUBBLES
6. REMOVE PRE-MASK
7. SQUEEGEE OVER THE ENTIRE GRAPHIC. Lay the piece of left over liner over the graphic with shiny side of liner facing you. Proceed to apply hard pressure to squeegee out any remaining air bubbles.
|
|
|
|
|
|
FREQUENTLY BOUGHT TOGETHER |
|
|
|