| |
 |
 |
 |
|
Pretty cool but.... |
January 16, 2017 |
| Reviewer:
Eric K. from MD
|
|
So the first thing that strikes you is how big these things actually are 3/4" wide and 5/8" deep. They are large. But I guess if they were much smaller the graphic wouldn't be as sharp.
The other thing is these will most likely be single use. The emblem is adhesive backed and it covers up the head of the screw. So if you ever need to pull off the plate you will probably need to put new adhesive on the back of the graphic.
Finally, it comes with 2-M6-30 .80 pitch machine screws. But the rear license plate bracket on my 2017 Clubman has M5 .80 pitch threading. So I had to buy M5-25 screws at the hardware store. I don't think M5-20 would be long enough but it might be close. Also, the rear bracket has metal threading so there is no flexibility in the type of screw you use.
The front bracket has plastic threading so the M6-30 screws worked OK.
All that being said these ARE pretty cool and I WOULD buy them again.
:-)
Was this review helpful to you? 
|
|
 |
|
 |
|
plate bolt covers